SHARP VZ-V4 Stereo System with Turntable

SPECIFICATIONS

GENERAL
Rated voltage: AC 100V, 50/60Нz
Power consumption: 90W
Input sockets: Microphone: 1 mV/1 Okohms,∅ 6.3mm jack AUX (PB): 190mV, 47kohms Output sockets: AUX (REС) : l00kohms Speaker: 4 ohms Headphones: 8 ohms, ∅ 6.3mm jack
Player Section V4
Type: Microcomputer control. Linear tracking full auto, Belt drive
Motor: DC motor with FG (for platter drive) x1, DC motor (for tonearm drive) x1
Drive system: Belt drive system
Speeds: 33-1 /3, 45 rpm
Wow & FI utter: 0.085% (DIN)
S/N: 67dB (NR-on) NR-off 57db
Tonearm: Dynamic balanced, Linear tracking
Cartridge: VM type Frequency response: 20-20,000Hz Exchangeable stylus: STY-121 Supplied devices: Automatic door open/close, auto lead-in, auto return, auto record size sensing, automatic speed selection, both side play, repeat play Dimensions : 370(W) x 152(D) x 372(H) mm
Weight : 6.5kg
Amplifier Section SM-V4
Circuit: OCL power amp with ±power supply
Power output: RMS;40W х 2 at 0.5% THD, 8 ohms
Total harmonics distortion: 0.1% (4ohms at 20W output)
Frequency response: 40Hz -20kHz ±1.5dB
Tone Controls: Bass: ±9dB (100Hz) Treble: ±9dB (10kHz)
Tuner Section ST-V4
Circuit: Superheterodyne FM/AM tuner, PLL stereo demodulation circuit, FM muting circuit built in
Frequency range:
FM: 76.1 -89.9MHz
AM 522-1611kHz
Sensitivity: FM: 2.0.V at S/N 26dB 40 kHz dev. Separation: FM: 36dB (1kHz FM stereo)
S/N: FM: 70dB (monaural 1kHz)
Cassette Deck Section RT-V4
Recording tracks: 4 track 2 channel stereo system
Recording system: AC bias (85kHz)
Erasing system: AC erasing system (85kHz)
Heads: Record/playback head х 1, Erase head х 1
Motor: Electronic control DC motor
Tape speed: 4.8cm/sec.
Fast forward time: 100 sec. (C-60 tape)
Rewind time: 100 sec. (C-60 tape)
Wow Aflutter: 0.2% (DIN)
Frequency response:
Normal tape: 25-15,000Hz
Chrome tape: 25-16,000Hz
Metal tape: 25-17,000Hz
S/N: Dolby NRoff: 57dB Dolby NR on: 67dB (Metal tape, over 5kHz)