DIATONE M-P05 Preamplifier
1 in stock
DIATONE M-P05
Brand New
It is a preamplifier which carries the mixing amplifier equipped with the reverb function in addition to a thin design.
Mixing with other sauce with a wired microphone and mixing simultaneous [ two microphones ] which uses FM wireless microphone are possible.
Moreover, the reverb mechanism is carried in the mixing amplifier part, and it is possible to attach a reverb only to two microphones apart from other sauce.
High proof-pressure low noise IC of the three-step direct connection Class-A SEPP circuit which made the first rank differential amplification with a dynamic load is adopted as equalizer amplifier. The low distortion is realized by applying stable NF to the circuit which was excellent in the big nakedness characteristic of a gain.
In order to prevent the surge of the frequency response in a tone control flat position, the tone-defeat switch is carried.
High proof-pressure low noise IC is adopted as tone control amplifier like equalizer amplifier.
Two tape decks can be connected and a tape duplicate is made.
The Subsonic Filter is carried.
650.00€
1 in stock
Form Control amplifier
Input sensitivity/impedance Phono: 2.5mV/50kohm
Tuner, Aux, Play1/2:150mV/20kohm
Mic: 1mV/6kohm
An Output voltage/impedance output: 1V (rating) / 600 ohms, 10V (maximum except take-off)
1/2:150mV of Rec(s)/600 ohms
Maximum permissible input Phono:220mV
Mic:90mV
Frequency response Phono: 20Hz-20kHz�}0.5dB
Tuner, Aux, and Play1/2:5Hz-80kHz+0 -0.5 dB
Mic: 80Hz-12kHz+0 -3dB
THD Phono:0.05%
Tuner, Aux, Play1/2:0.02%
S/N Phono:74dB
Tuner, Aux, Play of 1/2:99dB
Mic:58dB
Tone control Bass: �}10dB (100Hz)
Treble: �}10dB (10kHz)
Subsonic Filter 18Hz, 6 dB/oct
Power source AC100V, 50Hz/60Hz
Power consumption 8W
Dimensions Width 270x height 70x depth of 248mm
Weight 2.7kg
There are no reviews yet.